If you have owned Vivo Y622 smartphone and want to experience the updated version of firmware software, then follow up this guide in order to download and install the official latest version of flash file on your smartphone.
In many cases, you will find yourself quite needy for the official Stock ROM (flash file). Like, if you are struggling around with your smartphone performance.
Or it could be another major issue regarding your smartphone software. You might also have installed the custom ROM and now want the official credibility of your smartphone.
all these cases requires one solution and that is downloading and install the official firmware flash file on your smartphone.
Here, you will find the official latest version Vivo Y622 flash file. Simply, go ahead to the download section of this page below. Download the flash file and follow the detailed provided installation in this post ahead.
- Download Vivo Y622 Flash File: Official Latest (Stock ROM)
- Simple Guide To Install Flash File on Vivo Y622 (Stock ROM)
- Vivo Y622 Specifications
Download Vivo Y622 Flash File: Official Latest (Stock ROM)
- File Name: Vivo_Y622_PD1309W.zip
- File Type: Vivo Y622 Firmware Flash File
- File Size: 872 MB
- Flashing Tool Recommended: SP Flash Tool
Simple Guide To Install Flash File on Vivo Y622 (Stock ROM)
This guide includes two different methods to install the flash file on Vivo Y622. So, the choice is your’s which method best suits adopt it and follow it accordingly. before proceeding, you should follow the prerequisites first.
- Charge your phone to at least 80% or above.
- Also, don’t forget to make a complete back-up of your data.
- Moreover, download and install the latest USB drivers for your Vivo Y622 for connectivity purposes. Link
- You should also download and install ADB & Fastboot setup on your computer. Link
Method 1: How To Install Flash File on Vivo Y622 Using Vivo Recovery Mode
Step 1: You need to download the flash file for your Vivo Y622 from above.
Step 2: Grab the original cable and connect your smartphone to your computer. Transfer the flash file to the SD card of your phone. Flash file should be placed on SD card on the root directory (outside all the folders).
Step 3: Turn your Vivo Y622 “OFF” and remove the SD card from it.
Step 4: Boot your Vivo Y622 into fastboot mode. To do that, press and hold volume up + power buttons simultaneously until you see the “Fastboot mode” appears, and then release both buttons.
Step 5: While in fastboot mode, select the “recovery mode” option by using the power button.
Step 6: Moreover entering into recovery mode, select both the options “Clear Data” & “Clear All Data” and proceed.
Step 7: Return to the main menu by tapping on the “Return” option. In main menu, tap on “Reboot System now” option and insert the SD card to your phone.
Step 8: After the successful booting, go the “Recovery mode” again and tap on the “Install Updates” option.
Step 9: Browse for the flash file and locate it on your Vivo Y622. Select the flash file and install it.
Step 10: Sit back and wait for the flashing process to complete.
That’s all, you have successfully installed a flash file on your smartphone. Enjoy the original Stock ROM of your smartphone.
Method 2: How To Install Flash File on Vivo Y622 Using Flashing Tool
Step 1: Download the Vivo Y622 flash tool and Vivo firmware flash file from the download section and extract it.
Step 2: At this moment, navigate to the extracted SP flash tool folder and click on the flash_tool.exe file to run the flash tool.
Step 3: Once the SP flash tool runs successfully, then simply click on the “Scatter-Loading button” and locate & select the scatter file that you will find in the Vivo firmware flash file folder.
Step 4: Next adding the scatter file to the SP flash tool, now you need to uncheck the “Preloader option” in the SP flash tool as it is very important.
Step 5: Moving towards the flashing, now click on the “Download” button and grab your phone. Switch it “OFF” and connect it to your computer via original cable. Regarding the detection of your smartphone, you need to press one of the key Volume down/Volume up in order to detect your phone by SP flash tool.
Step 6: After that, your Vivo Y622 will successfully be detected by the SP Flash tool, then it will start the flashing process.
Step 7: Wait for the flashing process to complete, when it gets complete, then you will see the “green tick mark” at the end as a sign of successful flashing process.
Step 8: At last, disconnect your smartphone and close the SP flash tool.
That’s it, You have finally managed to install the firmware flash file on your smartphone. Enjoy your smartphone on original versions.
Importance of Installing The Flash File
By flashing the official firmware flash file, you can get the below privileges:
- You can get all the privileges given to you by the smartphone company at the time of purchasing like claiming a warranty if available.
- Official Stock ROM boost up the performance.
- Your phone will be in the original state running on the original Android OS.
- You can unbrick your bricked phone.
- Stock ROM unroot your rooted device.
- By flashing the Stock ROM, you can upgrade or downgrade your Vivo Y622.
Let us know in the comment section if you are facing any issues related to installing the Vivo Y622 firmware flash file.
Vivo Y622 Specifications
Vivo Y622 is equipped with 4.5 inches IPS TFT touchscreen display, providing a resolution of 480 x 854 pixels
It operates on Android 4.2 (Jelly Bean)
The internal memory of the phone includes 4 GB with 1 GB RAM and also support micro-SD card up to 128 GB
1.3 GHz processor
The camera features 8MP primary lens with LED flash including other features and 5MP secondary lens for selfies at front.
WLAN, Bluetooth, GPS, and USB are available
The sensors includes Light, Magnetometer, Gyroscope, Proximity, and Gravity
It is powered by Li-ion 1900 mAh battery
White, and Black