Download Vivo Y37A Flash File Official Latest Versions

Do you own Vivo Y37A smartphone? If yes, then this article is very important for you, as it contains the official latest version of firmware flash file for your device.

In many cases, you will find yourself quite needy for the official Stock ROM (flash file). Like, if you are struggling around with your smartphone performance.

Vivo Y37A flash file

Or it could be another major issue regarding your smartphone software. You might also have installed the custom ROM and now want the official credibility of your smartphone.

all these cases requires one solution and that is downloading and install the official firmware flash file on your smartphone.

Here, you will find the official latest version Vivo Y37A flash file. Simply, go ahead to the download section of this page below. Download the flash file and follow the detailed provided installation in this post ahead.

Download Vivo Y37A Flash File: Official Latest (Stock ROM)

flash file download
  • File Name:
  • File Type: Vivo Y37A Firmware Flash File
  • File Size: 1.5 GB
  • Flashing Tool Recommended: Xiaomi Flash Tool

Simple Guide To Install Flash File on Vivo Y37A (Stock ROM)

This guide includes two different methods to install the flash file on Vivo Y37A. So, the choice is your’s which method best suits you, adopt it and follow it accordingly. Before proceeding, you should follow the prerequisites first.


  • Charge your phone to at least 80% or above.
  • Also, don’t forget to make a complete back-up of your data.
  • Moreover, download and install the latest USB drivers for your Vivo Y37A for connectivity purposes. Link
  • You should also download and install ADB & Fastboot setup on your computer. Link

Method 1: How To Install Flash File on Vivo Y37A Using Vivo Recovery Mode

Step 1: You need to download the flash file for your Vivo Y37A from above.

Step 2: Grab the original cable and connect your smartphone to your computer. Transfer the flash file to the SD card of your phone. Flash file should be placed on SD card on the root directory (outside all the folders).

Step 3: Turn your Vivo Y37A “OFF” and remove the SD card from it.

Step 4: Boot your Vivo Y37A into fastboot mode. To do that, press and hold volume up + power buttons simultaneously until you see the “Fastboot mode” appears, and then release both buttons.

Step 5: While in fastboot mode, select the “recovery mode” option by using the power button.

Step 6: Moreover entering into recovery mode, select both the options “Clear Data” & “Clear All Data” and proceed.

Step 7: Return to the main menu by tapping on the “Return” option. In main menu, tap on “Reboot System now” option and insert the SD card to your phone.

Step 8: After the successful booting, go the “Recovery mode” again and tap on the “Install Updates” option.

Step 9: Browse for the flash file and locate it on your Vivo Y37A. Select the flash file and install it.

Step 10: Sit back and wait for the flashing process to complete.

That’s all, you have successfully installed a flash file on your smartphone. Enjoy the original Stock ROM of your smartphone.

Method 2: How To Install Firmware Flash File (Stock ROM) on Vivo Y37A Using Xiaomi Flashing tool

Step 1: Download the Vivo firmware flash file for your Vivo Y37A and Xiaomi flash tool from the above-provided links mentioned in the download section of this page and then extract it.

Step 2: Simply, Click on the installation file of Xiaomi flash tool in order to install it.

Step 3: Hold your smartphone and turn it off completely. When it gets off, then press & hold the volume down button and Power buttons until your smartphone enters into the download mode/fastboot mode.

Step 4: Simply, connect your smartphone to a computer using original cable.

Step 4: Now, run the Xiaomi Flash Tool, click on the “Select” button and locate & select the downloaded Firmware folder for your Vivo Y37A.

Step 5: After adding the Vivo firmware flash file to the Xiaomi flash tool, now click on the “Flash” button on the Xiaomi flash tool in order to start the flashing process.

Step 6: Let’s wait for the flashing process to complete and when it gets complete, you will see the “success” message ahead.

Step 7: After getting the success message, now disconnect your smartphone.

Finally, you have successfully installed the official latest version of the flash file on your Vivo Y37A smartphone.

Importance of Installing The Flash File

By flashing the official firmware flash file, you can get the below privileges:

  • You can get all the privileges given to you by the smartphone company at the time of purchasing like claiming a warranty if available.
  • Official Stock ROM boost up the performance.
  • Your phone will be in the original state running on the original Android OS.
  • You can unbrick your bricked phone.
  • Stock ROM unroot your rooted device.
  • By flashing the Stock ROM, you can upgrade or downgrade your Vivo Y37A.

Let us know in the comment section if you are facing any issues related to installing the Vivo Y37A firmware flash file.

Vivo Y37A Specifications

Vivo Y37A flash file


Vivo Y37A is equipped with 5.5 inches IPS LCD touchscreen display, providing the resolution of 720 x 1280 pixels

Software Version:

It operates on Android 5.0 along with FuntouchOS 2.1


The internal memory of the phone includes 128 GB with 8 GB RAM or 256 GB with 8 GB RAM


An Octa-Core processor along with Qualcomm Snapdragon 615 MSM8939 Chipset


The camera features 13MP Primary lens with LED flash including other features and 5MP secondary lens for selfies at front.

Connectivity Medium:

WLAN, Bluetooth, GPS, and USB are available


The sensors includes Accelerometer, Ambent Light, Gyro, Proximity, and Compass


It is powered by Li-Po 2720 mAh battery




Price of Vivo Y37A is about $250.

Leave a Comment