Vivo V21 5G Flash File (Complete Installation Guide)

Flashing the latest versions of firmware flash file could save you from unexpected issues, you are facing with the current version of software running on your Vivo V21 5G. Moreover, you will experience new tweaks along with updated version of stock apps and customized UI.

In many cases, you will find yourself quite needy for the official Stock ROM (flash file). Like, if you are struggling around with your smartphone performance.

Vivo_V21_5G flash file

Or it could be another major issue regarding your smartphone software. You might also have installed the custom ROM and now want the official credibility of your smartphone.

all these cases requires one solution and that is downloading and install the official firmware flash file on your smartphone.

Here, you will find the official latest version Vivo V21 5G flash file. Simply, go ahead to the download section of this page below. Download the flash file and follow the detailed provided installation in this post ahead.

Simple Guide To Install Firmware Flash File on Vivo V21 5G (Stock ROM)

  1. Using Recovery Mode
  2. Using QFIL Tool
  3. Using QPST Tool
  4. Using SP Flash Tool
  5. Using Lenovo Downloader Tool
  6. Using Xiaomi Flash Tool

Pre-Requisites:

  • Charge your phone to at least 80% or above.
  • Also, don’t forget to make a complete back-up of your data.
  • Moreover, download and install the latest USB drivers for your Vivo V21 5G for connectivity purposes. Link
  • You should also download and install ADB & Fastboot setup on your computer. Link

Method 1: How To Install Flash File on Vivo V21 5G Using Recovery Mode

Step 1: You need to download the flash file for your Vivo V21 5G from above.

Step 2: Grab the original cable and connect your smartphone to your computer. Transfer the flash file to the SD card of your phone. Flash file should be placed on SD card on the root directory (outside all the folders).

Step 3: Turn your Vivo V21 5G “OFF” and remove the SD card from it.

Step 4: Boot your Vivo V21 5G into fastboot mode. To do that, press and hold volume up + power buttons simultaneously until you see the “Fastboot mode” appears, and then release both buttons.

Step 5: While in fastboot mode, select the “recovery mode” option by using the power button.

Step 6: Moreover entering into recovery mode, select both the options “Clear Data” & “Clear All Data” and proceed.

Step 7: Return to the main menu by tapping on the “Return” option. In main menu, tap on “Reboot System now” option and insert the SD card to your phone.

Step 8: After the successful booting, go the “Recovery mode” again and tap on the “Install Updates” option.

Step 9: Browse for the flash file and locate it on your Vivo V21 5G. Select the flash file and install it.

Step 10: Sit back and wait for the flashing process to complete.

That’s all, you have successfully installed a flash file on your smartphone. Enjoy the original Stock ROM of your smartphone.

Method 2: How To Install Firmware Flash File (Stock ROM) on Vivo V21 5G Using QFIL Flashing tool

Step 1: Download the Vivo V21 5G firmware flash file for your Vivo V21 5G and Vivo V21 5G flash tool from the above-provided links mentioned in the download section of this page and then extract it.

Step 2: Simply, run the Vivo V21 5G flash tool also known a QFIL tool as for now.

Step 3: Hold your smartphone and turn it off completely. When it gets off, then press & hold the volume up button and connect your smartphone to your computer via original cable.

Step 4: Now, on the Vivo V21 5G flash tool, click on the “browse” button and locate & select the downloaded ROM file for your Vivo V21 5G.

Step 5: After adding the Vivo V21 5G firmware flash file to the Vivo V21 5G flash tool, now click on the “Download” button on the Vivo V21 5G flash tool in order to start the flashing process.

Step 6: Let’s wait for the flashing process to complete and when it gets complete, you will see the “success” message ahead.

Step 7: After getting the success message, now disconnect your smartphone.

Method 3: How To Install Flash File on Vivo V21 5G Using QPST Flashing Tool

Step 1: Download the Vivo V21 5G firmware flash file for your Vivo V21 5G and Vivo V21 5G flash tool from the above-provided links mentioned in the download section of this page and then extract it.

Step 2: Simply, run the Vivo V21 5G flash tool also known a QPST tool as for now.

Step 3: Hold your smartphone and turn it off completely. When it gets off, then press & hold the volume up button and connect your smartphone to your computer via original cable.

Step 4: Now, on the Vivo V21 5G flash tool, click on the “browse” button and locate & select the downloaded ROM file for your Vivo V21 5G.

Step 5: After adding the Vivo V21 5G firmware flash file to the Vivo V21 5G flash tool, now click on the “Start” button on the Vivo V21 5G flash tool in order to start the flashing process.

Step 6: Let’s wait for the flashing process to complete and when it gets complete, you will see the “success” message ahead.

Step 7: After getting the success message, now disconnect your smartphone.

Method 4: How To Install Flash File on Vivo V21 5G Using SP Flashing Tool

Step 1: Download the Vivo V21 5G flash tool and Vivo V21 5G firmware flash file from the download section and extract it.

Step 2: At this moment, navigate to the extracted SP flash tool folder and click on the flash_tool.exe file to run the flash tool.

Step 3: Once the SP flash tool runs successfully, then simply click on the “Scatter-Loading button” and locate & select the scatter file that you will find in the Vivo V21 5G firmware flash file folder.

Step 4: Next adding the scatter file to the SP flash tool, now you need to uncheck the “Preloader option” in the SP flash tool as it is very important.

Step 5: Moving towards the flashing, now click on the “Download” button and grab your phone. Switch it “OFF” and connect it to your computer via the original cable. Regarding the detection of your smartphone, you need to press one of the key Volume down/Volume up in order to detect your phone by SP flash tool.

Step 6: After that, your Vivo V21 5G will successfully be detected by the SP Flash tool, then it will start the flashing process.

Step 7: Wait for the flashing process to complete, when it gets complete, then you will see the “green tick mark” at the end as a sign of successful flashing process.

Step 8: At last, disconnect your smartphone and close the SP flash tool.

Method 5: How To Install Firmware Flash File (Stock ROM) on Vivo V21 5G Using Lenovo Downloader Flashing tool

Step 1: Download the Vivo V21 5G firmware flash file for your Vivo V21 5G and Lenovo Downloader tool from the above-provided links mentioned in the download section of this page and then extract it.

Step 2: Simply, run the Lenovo Downloader Tool.

Step 3: Connect your smartphone to your computer via original cable.

Step 4: Now, Click on the load button and select the firmware folder that you have just downloaded before for your Vivo V21 5G.

Step 5: Just, click on the start button now on Lenovo Downloader Tool.

Step 6: Turn your Smartphone OFF completely. Press and Hold Volume Up and Volume Down buttons and connect your phone to a computer.

Step 7: So, now when your smartphone is successfully detected by the Lenovo Downloader Tool, It will automatically start the flashing process.

Step 8: Wait for the process to complete and when it gets complete, then you will see the passed message.

Method 6: How To Install Firmware Flash File (Stock ROM) on Vivo V21 5G Using Xiaomi Flashing tool

Step 1: Download the Vivo V21 5G firmware flash file for your Vivo V21 5G and Xiaomi flash tool from the above-provided links mentioned in the download section of this page and then extract it.

Step 2: Simply, Click on the installation file of Xiaomi flash tool in order to install it.

Step 3: Hold your smartphone and turn it off completely. When it gets off, then press & hold the volume down button and Power buttons until your smartphone enters into the download mode/fastboot mode.

Step 4: Simply, connect your smartphone to a computer using original cable.

Step 4: Now, run the Xiaomi Flash Tool, click on the “Select” button and locate & select the downloaded Firmware folder for your Vivo V21 5G.

Step 5: After adding the Vivo V21 5G firmware flash file to the Xiaomi flash tool, now click on the “Flash” button on the Xiaomi flash tool in order to start the flashing process.

Step 6: Let’s wait for the flashing process to complete and when it gets complete, you will see the “success” message ahead.

Step 7: After getting the success message, now disconnect your smartphone.

Importance of Installing The Flash File

By flashing the official firmware flash file, you can get the below privileges:

  • You can get all the privileges given to you by the smartphone company at the time of purchasing like claiming a warranty if available.
  • Official Stock ROM boost up the performance.
  • Your phone will be in the original state running on the original Android OS.
  • You can unbrick your bricked phone.
  • Stock ROM unroot your rooted device.
  • By flashing the Stock ROM, you can upgrade or downgrade your Vivo V21 5G.

Let us know in the comment section if you are facing any issues related to installing the Vivo V21 5G firmware flash file.

Vivo V21 5G Specifications

Display:

Vivo V21 5G is equipped with 6.44 inches AMOLED touchscreen display, providing the resolution of 1080 x 2400 pixels

Software Version:

It operates on Android 11 along with Funtouch 11

Storage:

The internal memory of the phone includes 128GB paired with 8GB RAM, or 256GB with 8GB RAM

Hardware:

An Octa-Core processor along with MediaTek MT6853 Dimensity 800U 5G Chipset

Camera:

The camera features Triple 64MP + 8MP + 2MP primary lens with LED flash including other features. In addition, 44MP secondary lens with Dual-LED flash is available for selfies at front

Battery:

It is powered by Li-Po 4000 mAh battery

Colors:

Dusk Blue, Sunset Dazzle, and Arctic White

Price:

Price of Vivo V21 5G in India starts from 27,778 INR

Leave a Comment